Kingsine Electric Automation Co., Ltd.
Kingsine Electric Automation Co., Ltd. Specialize in Electric Power Testing
Add to Cart
Able to test the numerical IEDs relays according IEC61850-9-1, IEC61850-9-2, IEC60044-7/8 etc
Totally complied IEC61850
Fiber board selectable, Each fiber board can provide 4 channels fiber port. 4 / 8 / 12 / 16 fiber port optional configuration
Able to subｓｃｒｉｐｔions & simulations SMV and GOOSE signals, each SMV ability configure up to 64 sampling channels, satisfy each customer’s different selection of testing requires
13 independent low-level channels output
Inbuilt 9.7” true color TFT LCD display with 1024×768 resolution, keyboard and mouse, easy operation for user and provide excellent vision feeling for intelligence substation
8 pairs binary inputs and 4 pairs binary outputs
Characteristics
Provide 16 ST output fiber ports and 2 ST reception fiber port, output 16 group standard FT3 form sampling value message which comply with IEC60044-7/8, receive 2 group standard FT3 form sampling value message which comply IEC60044-7/8;
Subscribe and simulation GOOSE message;
13 channels low-level signals output, each channels from 0~8 V ac/dc;
Simulate IED publish GOOSE initiatively when power-on in order to avoid tested device lock-out which cause by link interruption after testing stop injection;
Auto-analyze SCL (SCD, ICD, CID, NPI) format file, realize auto configuration of sampling value and GOOSE message, save or export as a configuration file, convenient for testing;
Auto-search protection device from MX, fiber digital signal from Intelligent unit, realize auto configuration function of sampling value and GOOSE message;
Simulate unusual states (lose frame, mis-sequence, quality unusual, message resend, data unusual, out of step);
Inbuilt GPS module, fiber IRIG-B code synchronization and IEEE1588 time synchronization function.
Parameter
| Fiber Optic Communication Interface | |
| Type | (100Mbit, Fiber, full-duplex) |
| Port number | 4 / 8 / 12 / 16 pairs optional |
| Port Type | LC |
| Fiber type | 62.5/125μm (Multiple optical fiber, orange red) |
| Wave length | 1310 nm |
| Transmission distance | > 1 km |
| Status indication |
SPD green (light): effective connection Link/Act Yellow (blinking): date exchanging |
| FT3 Port | |
| Standard | IEC60044-7/8 |
| Port number | 4/8/12/16 for sending, 2 for receiving |
| Port type | ST |
| Wave length | 850 nm |
| Low-level singles analog output | |
| Output channel | 13 channels |
| Set range |
AC:0~8 Vrms (Valid value) DC: 0~8 V |
| Accuracy |
<0.2%(0.1~0.8 Vrms) <0.1%(0.8~8 Vrms) |
| Resolution | 250µV |
| Harmonic distortion | (THD%)<0.1% |
| Frequency range | DC~1.0 kHz |
| Frequency Accuracy | 0.002% (power frequency) |
| Frequency resolution | 0.001Hz |
| Phase range | 0~±359.9° |
| Phase Accuracy | <0.1°(50/60Hz) |
| Phase resolution | ±0.1° |
| Binary Output | |
| Quantity | 8 pairs |
| Binary output 1~4 |
Potential free relay contacts (software controlled) AC: Vmax:250V/Imax:3A DC: Vmax:250V/Imax:1A |
| Binary output 5~8 |
fast contact,open-collector response speed: 100us DC Break Capacity: 5-15V/5mA, 10mA max AC not permit |
| Binary Input | |
| Quantity | 8pairs |
| Binary input | Dry contacts/0~300 Vdc (Binary input reversal potential can be set) |
| Sampling frequency | 10 KHz |
| Time resolution | 100 us |
| Max. measure time | 1.50×105 s |
| Timing error |
±1ms (0.001s~1s) ±0.1%(1s~1.50×105 s) |
| Electric isolation | 8 pairs binary input electric isolation. |
| Threshold impedance | 5 kΩ…13kΩ(Dry contact) |
| Time Synchronization | |
| GPS | Support, Built-in integration |
| IRIG-B | Support, port type ST |
| IEEE1588 | Support, port type LC |
| Other Port | |
| RJ45 | 2pcs |
| USB | 2pcs |
| RS232 | 1pc |
| Power Supply | |
| Nominal Voltage | 100~240V (AC) |
| Allow Voltage | 100V ~ 260V (AC) or 127V~ 350V (DC) |
| Nominal Frequency | 50Hz |
| Allow Frequency | 40~60Hz |
| Current Consumption | 3A(max) |
| Connection Type | Standard AC socket 60320 |
| Weight & Size | |
| Weight | 8Kg |
| Dimensions(W x D x H) | 360×340×160(mm) |
| Operating Temperature | 0℃~55℃ |
| Storage Temperature | -20℃~75℃ |
| Humidity | <95%RH, non-condensing |